PgUp/PgDn sent as NumPgUp/NumPgDn

[Dwarden]

Hello,

i have this problem on Windows 7 x64 with Simulated Keystokes of {PGUP} {PGDN}

they actually detected not as PageUp and PageDown but as NumPageUp and NumPageDown

i have no idea how resolve it because using {numlock} prior / past the key is detected by application too

thanks in advance for help

[phil]

Any reason you have posted this to the Inp/Out forum? If your asking about XMouse then let me know and I will move the post.

For what its worth, I am not aware of any difference between numpgup and numpgdn at the virtual key level...
If you can find the virtual key code then you can enter that directly as a {EXT:<n>} (where n is the virtual keycode) tag in simulated keystrokes.

Thanks,
Phil

[Dwarden]

sorry ofcourse this belong to the Xmouse forum ...
no idea how i ended here

[phil]

ok moved

[phil]

I spent some time playing with the simulated keystroke code over the last few days and I did find a problem with the pageup/down key simulation. However, Im not sure if will fix this problem - because I cant actually see a way of specifying if its the numpad page keys or the normal ones - however the problem I have fixed for the arrow keys applies to these keys as well and it might just fix your issue.

If you want to test a pre-release/beta let me know and I'll PM you a link, otherwise you can try the next release whenever that comes along to see if it helps.

Incidentally, what application are you using to detect the keys...??

Thanks,
Phil