Code: Select all
# Sample XMBC Language template file.
# Base version 2.6.2
#
# Changes to this template are marked
# -- Updated in <version> --
# or
# -- Added in <version> --
#
# Ensure the file extension is .xmbclp (XMouse Button Control Language Pack)
# which you can "install" into XMBC simply by double clicking it, or drop it into the profile folder.
#
#Describe the language pack here - this is displayed in the language dropdown in the settings tab.
Language=ç¹é«”ä¸æ–‡
Description=有任何å•é¡Œè«‹å¯„信至yangwen5301@me.com
#Put your name here and (at some point in the future) you will be creditied in the user interface
Author=Kevin Huang
#Setup screen
"Scrolling && Navigation" => "滾動與導航"
"Default" => "é è¨"
"A&dd" => "å¢žåŠ "
"Edi&t" => "編輯"
"C&opy" => "複製"
"Remo&ve" => "移除"
"&Settings" => "è¨ç½®"
"Abo&ut" => "關於"
"&Apply" => "套用"
"&Close" => "關閉"
#Next line is Also shared with the general settings tab!
"Description" => "æè¿°"
"Process" => "處ç†ç¨‹åº"
"Class" => "é¡ž"
"Window Class" => "視窗類"
"Parent Class" => "父類"
"Application / Window Profiles:" => "應用程å¼/視窗é…ç½®"
"Profile Information" => "é…置資訊"
"Setup" => "è¨ç½®"
#General strings
"Layer" => "層"
"Portable" => "攜帶版"
"All" => "全部"
"Not Defined" => "尚未定義"
"Default: All windows that do not match any profile." => "é è¨: 所有視窗ä¸ç¬¦åˆä»»ä½•é…ç½®"
"&OK" => "確定"
"&Cancel" => "å–消"
"OK" => "確定"
"Cancel" => "å–消"
"Global Settings" => "全域è¨ç½®"
#Global settings: General settings
"General" => "全域"
"Mouse &Speed" => "æ»‘é¼ é€Ÿåº¦"
"Ma&ke scroll wheel scroll window under cursor" => "使滾輪å¯ä»¥æ»¾å‹•æ»‘é¼ ä¸‹çš„è¦–çª—"
"B&ypass ALL actions when SCROLL LOCK is ON" => "é–‹å•Ÿæ²å‹•éŽ–定éµæ™‚忽略所有動作"
"By&pass 'disabled' actions when SCROLL LOCK is ON" => "é–‹å•Ÿæ²å‹•éŽ–定éµæ™‚忽略「ç¦ç”¨ã€çš„動作"
"S&wap 4th and 5th buttons" => "交æ›ç¬¬å››å’Œç¬¬äº”按éµ"
"Sw&ap 4th and 5th buttons when connected by remote desktop (RDP)" => "當連接到é 端桌é¢(RDP)時交æ›ç¬¬å››å’Œç¬¬äº”按éµ"
"&Disable when running under remote desktop (RDP)" => "當連接到é 端桌é¢(RDP)時ç¦ç”¨"
"Show layer switch &balloon notifications" => "在通知å€åŸŸé¡¯ç¤ºå±¤åˆ‡æ›è¨ç½®"
"Language" => "語言"
# -- Updated in 2.6 Beta 1 --
"A&ctivate window when scrolling" => "滾動時啟動視窗"
# --
# -- Updated in 2.4 Beta 10 --
"NOTE: You must press OK and apply the settings on the main screen before they take effect. Language changes will not be applied until the main window is re-opened." => "æ示: ä½ å¿…é ˆæŒ‰åœ¨ç¨‹å¼ä¸»ç•«é¢çš„「確定ã€æˆ–「套用ã€ä½¿è¨ç½®ç”Ÿæ•ˆã€‚修改語言介é¢å¿…é ˆé‡æ–°æ‰“開程å¼ä¸»ç•«é¢å¾—以生效"
# The following tag is the LABEL displayed on the general settings page.
# The word 'Author' should be directly translated, ie. Don't put your name here :)
# NOTE: The description labe is also on the setup screen with the same meaning.
"Author" => "作者"
# --
#Global settings: Advanced settings
"Advanced" => "進階"
"NOTE: You must press OK and apply the settings on the main screen before they take effect." => "æ示: ä½ å¿…é ˆæŒ‰åœ¨ç¨‹å¼ä¸»ç•«é¢çš„「確定ã€æˆ–「套用ã€ä½¿è¨ç½®ç”Ÿæ•ˆã€‚"
"Enable profi&le switching on mouse move" => "ç•¶æ»‘é¼ ç§»å‹•æ™‚é–‹å•Ÿé…置切æ›"
"Process &Non-Client mouse messages *RECOMMENDED*" => "處ç†éžå®¢æˆ¶ç«¯çš„æ»‘é¼ è¨Šæ¯(建è°)"
"Reset &sticky buttons when any other button is pressed" => "ç•¶æŒ‰ä¸‹å…¶ä»–æ»‘é¼ æŒ‰éµæ™‚é‡ç½®ç›¸é»éµ"
"R&eset sticky buttons when any other key is pressed" => "當按下其他按éµæ™‚é‡ç½®ç›¸é»éµ"
"Show &tray icon by default" => "é è¨é¡¯ç¤ºé€šçŸ¥å€åŸŸåœ–示"
"&Ignore numlock state for Simulated Keystrokes" => "在模擬按éµæ™‚忽略數å—éµç›¤ç‹€æ…‹"
"Cycle l&ayers by left clicking tray icon" => "左擊通知å€åŸŸåœ–示以循環切æ›å±¤" # -- Updated in 2.5 beta 4 --
"&Fixup (de-bounce) tilt wheel auto-repeat" => "ä¿®æ£å‚¾æ–œæ»¾è¼ªè‡ªå‹•é‡è¤‡é€ŸçŽ‡"
"&Initial repeat rate" => "åˆå§‹é‡è¤‡é€ŸçŽ‡"
"&Repeat tilt rate" => "é‡è¤‡å‚¾æ–œé€ŸçŽ‡"
"(ms)" => ""
"Dela&y between simulated keystrokes" => "模擬按éµå»¶é²"
"&CPU Priority" => "CPU å„ªå…ˆé †åº"
"Check for new &version every" => "檢查更新版本"
"days (at application startup)" => "天(當應用程å¼å•Ÿå‹•æ™‚)"
"Enable &DEBUG logging" => "開啟除錯日誌"
"*** Debug logging will degrade performance and response times! ***" => "*** 開啟除錯日誌會é™ä½Žæ•ˆèƒ½å’Œå應時間! ***"
# -- Added in 2.4 Beta 15 --
"Realtime" => "åŠæ™‚"
"High" => "高"
"Above normal" => "高於標準"
"Normal" => "標準"
"Below normal" => "低於標準"
# --
#Global settings: Hotkey tab
"Hotkeys" => "熱éµ"
"Enable &global hotkeys" => "開啟全域熱éµ"
"You can assign your hotkeys using the boxes below..." => "使用下列框é…ç½®ä½ çš„ç†±éµ"
"Switch to Layer &1" => "切æ›åˆ°å±¤ &1"
"Switch to Layer &2" => "切æ›åˆ°å±¤ &2"
"Switch to Layer &3" => "切æ›åˆ°å±¤ &3"
"Switch to Layer &4" => "切æ›åˆ°å±¤ &4"
"Switch to Layer &5" => "切æ›åˆ°å±¤ &5"
"&Next Layer" => "下一層"
"&Previous Layer" => "上一層"
"&Enable/Disable XMBC" => "啟用/ç¦ç”¨ XMBC"
"&Toggle Debug mode" => "切æ›é™¤éŒ¯æ¨¡å¼"
"&Save desktop icon layout" => "ä¿å˜æ¡Œé¢å¸ƒå±€"
"Restore desktop icon &layout" => "還原桌é¢å¸ƒå±€" # -- Updated in 2.5 beta 4 --
"Toggle &X Axis Lock" => "åˆ‡æ› X 軸鎖定"
"Toggle &Y Axis Lock" => "åˆ‡æ› Y 軸鎖定"
"NOTE: Only valid hotkey combinations will be allowed." => "æ示: åªæœ‰æœ‰æ•ˆçš„熱éµçµ„åˆè¢«å…許"
# -- Added in 2.4 Beta 15 --
"Global hotkeys are disabled when in the settings dialog. You have to apply and close the settings before they will work." => "全域熱éµåœ¨è¨ç½®è¦–窗會被ç¦ç”¨ï¼Œå¥—用然後關閉è¨ç½®è¦–窗得以生效。"
#Global settings: Modifyer key tab
"Modifier Keys" => "組åˆéµ"
"Enab&le modifier keys (switching layers && axis locking)" => "啟用組åˆéµ(切æ›å±¤å’Œè»¸éŽ–定)"
"Modifier keys are keyboard shortcuts that will temporarily activate the function while the key combination is held down. As soon as you release the key(s), the previous state will return." => "組åˆéµç‚ºä¸€éµç›¤å¿«æ·éµï¼Œç•¶è¢«è§¸ç™¼æ™‚會çŸæš«åŸ·è¡Œå¿«æ·éµçš„功能;當放開按éµæ™‚會回到先å‰ç‹€æ…‹ã€‚"
"Layers" => "層"
"Activate Layer 1" => "激活層 1"
"Activate Layer 2" => "激活層 2"
"Activate Layer 3" => "激活層 3"
"Activate Layer 4" => "激活層 4"
"Activate Layer 5" => "激活層 5"
"Axis Locking" => "軸鎖定"
"Lock X-Axis" => "鎖定 X 軸"
"Lock Y-Axis" => "鎖定 Y 軸"
"NOTE: Axis locking requires that you enable axis locking for each application specific profile where you wish to use axis locking. This allows you to lock axis only for a specific application." => "æ示: éŽ–å®šè»¸æ™‚å¿…é ˆå•Ÿç”¨è©²æ‡‰ç”¨ç¨‹å¼é…置的軸鎖定é¸é …,這å¯ä»¥å…許使用者在僅在特定的應用程å¼ä¸‹éŽ–定軸。"
"None" => "ç„¡"
"Shift" => ""
"Control" => ""
"Alt" => ""
"Shift + Control" => ""
"Shift + Alt" => ""
"Shift + Control + Alt" => ""
"Control + Alt" => ""
"Left Window Key" => "å·¦ Windows éµ"
"Right Window Key" => "å³ Windows éµ"
"App Menu Key" => "開始éµ"
#Context Menus
"Edit" => "編輯"
"Copy" => "複製"
"Remove" => "移除"
"Import" => "匯入"
"Export Selected" => "é¸æ“‡åŒ¯å‡º"
"Export All" => "全部匯出"
"&Layers" => "層"
"Layer &1" => "層 &1"
"Layer &2" => "層 &2"
"Layer &3" => "層 &3"
"Layer &4" => "層 &4"
"Layer &5" => "層 &5"
"&Setup" => "è¨ç½®"
"&Hide Icon" => "éš±è—圖示"
"&Open log file" => "開啟日誌"
"&Disable X-Mouse Button Control" => "ç¦ç”¨ X-Mouse Button Control"
"S&ave desktop icon layout" => "ä¿å˜æ¡Œé¢å¸ƒå±€"
"&Restore desktop icon layout" => "回復桌é¢å¸ƒå±€"
"Exit" => "離開"
#Layer tab(s)
"Layer name" => "層å稱"
"&Left Button" => "æ»‘é¼ å·¦éµ"
"&Right Button" => "æ»‘é¼ å³éµ"
"&Middle Button" => "æ»‘é¼ ä¸éµ"
"&Middle Button 2" => "æ»‘é¼ ä¸éµ2"
"Mouse Button &4" => "æ»‘é¼ åŠŸèƒ½éµ4"
"Mouse Button &5" => "æ»‘é¼ åŠŸèƒ½éµ5"
"W&heel Up" => "滾輪上滾"
"Wh&eel Down" => "滾輪下滾"
"Tilt Wheel Le&ft" => "滾輪左傾"
"Tilt Wheel Ri&ght" => "滾輪å³å‚¾"
"Reset Layer" => "é‡ç½®å±¤"
# -- Added in 2.4 Beta 17 --
"This item is reserved to when a layer modifier\nis used to switch to this layer.\n\nYou can not select it directly." => "這個物件是為了ä¿ç•™çµ¦å±¤ä¿®æ”¹æ™‚å¯ä»¥åˆ‡æ›åˆ°æ¤å±¤ï¼Œæ‚¨ä¸èƒ½ç›´æŽ¥é¸æ“‡å®ƒã€‚"
"Layer changing commands need to be applied to all affected layers.\n\nContinue?" => "å±¤æ”¹è®ŠæŒ‡ä»¤å¿…é ˆè¢«å¥—ç”¨æ‰èƒ½å°å…¨éƒ¨çš„層生效。\n\n繼續?"
"You can not add a LAYER X modifier to this layer because another layer already has a layer modifier setup to this layer.\nDoing so would cause undetermined behaviour and is therefore not supported." => "您ä¸èƒ½æ–°å¢žä¸€å€‹å±¤ X åŽ»ä¿®æ”¹é€™å€‹å±¤å› ç‚ºå·²ç¶“æœ‰ç›¸åŒçš„層è¨å®šã€‚這樣åšæœƒå°Žè‡´ç‚ºé 期的çµæžœæ‰€ä»¥ç„¡æ³•æ”¯æ´ã€‚"
"If you remove a layer changing command, it will be removed from ALL affected layers.\n\nContinue?" => "å¦‚æžœä½ ç§»é™¤äº†å±¤æ”¹è®Šçš„æŒ‡ä»¤ï¼Œå®ƒå°‡æœƒå¾žæ‰€æœ‰è¢«å½±éŸ¿åˆ°çš„å±¤ä¸ç§»é™¤ã€‚\n\n繼續?"
#--
#simulated keystrokes
"(undefined)" => "(未定義)"
"(pressed)" => "(按下)"
"(released)" => "(釋放)"
"(during)" => "(æŒçºŒ)"
"(thread-down)" => ""
"(thread-up)" => ""
"(repeat)" => "é‡è¤‡"
"(sticky repeat)" => "é‡è¤‡ç›¸é»éµ"
"(sticky hold)" => "按ä½ç›¸é»éµ"
"(pressed & released)" => "按下並釋放" # -- Added in 2.4 Beta 12 --
#Simulated Keystrokes dialog
"Simulated Keystrokes" => "模擬按éµ" # -- Updated in 2.4 Beta 15 --
"Enter the custom key(s)" => "輸入自定義按éµ"
"How to send the simulated key strokes:" => "如何é€å‡ºæ¨¡æ“¬æŒ‰éµ"
"1 As mouse button is pressed" => "1 æ»‘é¼ æŒ‰éµæŒ‰ä¸‹"
"2 As mouse button is released" => "2 æ»‘é¼ æŒ‰éµé‡‹æ”¾"
"3 During (press on down, release on up)" => "3 æŒçºŒ(按下並釋放期間)"
"4 In another thread as mouse button is pressed" => "4 在å¦ä¸€å€‹åŸ·è¡ŒåºæŒ‰ä¸‹æ»‘é¼ æŒ‰éµ"
"5 In another thread as mouse button is released" => "5 在å¦ä¸€å€‹åŸ·è¡Œåºé‡‹æ”¾æ»‘é¼ æŒ‰éµ"
"6 Repeatedly while the button is down" => "6 åœ¨æ»‘é¼ æŒ‰ä½æ™‚æŒçºŒé‡è¤‡"
"7 Sticky (repeatedly until button is pressed again)" => "7 相é»éµ(æŒçºŒé‡è¤‡ç›´åˆ°æŒ‰éµå†åº¦è¢«æŒ‰ä¸‹)"
"8 Sticky (held down until button is pressed again)" => "8 相é»éµ(按ä½ç›´åˆ°æŒ‰éµå†åº¦æŒ‰ä¸‹)"
"9 As mouse button is pressed & when released" => "9 當釋放時按下" # -- Added in 2.4 Beta 12 --
"Only send if profile's process is active" => "僅在該é…置的程åºåœ¨é‹è¡Œç‹€æ…‹ä¸‹æ™‚é€å‡º"
"Auto repeat delay" => "自動é‡è¤‡å»¶é²"
"(milliseconds)" => "(毫秒)"
"0 = Windows default repeat delay && speed." => "0= 系統默èªé‡è¤‡å»¶é²å’Œé€Ÿåº¦"
"Type the key sequence into the box above.\r\nYou can simulate the following extended keys using the specified tags..." => "輸入按éµåºåˆ—。 \r\nä½ å¯ä»¥ä½¿ç”¨ä»¥ä¸‹æŒ‡å®šæ¨™ç±¤æ¨¡æ“¬å»¶ä¼¸æŒ‰éµ"
"Modifier tags:\r\n {CTRL} {RCTRL} {ALT} {RALT} {SHIFT} {RSHIFT} {LWIN} {RWIN} {APPS}\r\n NOTE:\tmodifier tags can be combined like {CTRL}{ALT} but apply to the NEXT KEY ONLY.\r\n\tFor example, to send CTRL+a+CTRL+s you should type '{CTRL}A{CTRL}S'." => "組åˆæ¨™ç±¤:\r\n {CTRL} {RCTRL} {ALT} {RALT} {SHIFT} {RSHIFT} {LWIN} {RWIN} {APPS}\r\n æ示:\t組åˆæ¨™ç±¤å¯ä»¥å¦‚ {CTRL}{ALT} 但僅å°ä¸‹ä¸€æ¬¡æŒ‰éµæœ‰æ•ˆã€‚\r\n\t例如é€å‡º CTRL+a+CTRL+s è¨Šè™Ÿä½ å¿…é ˆè¼¸å…¥ '{CTRL}A{CTRL}S'"
"Extended key tags:\r\n {DEL} {INS} {PGUP} {PGDN} {HOME} {END} {RETURN} {ESCAPE} {BACKSPACE}\r\n {TAB} {PRTSCN} {PAUSE} {SPACE} {CAPSLOCK} {NUMLOCK} {SCROLLLOCK}" => "延伸標籤:\r\n {DEL} {INS} {PGUP} {PGDN} {HOME} {END} {RETURN} {ESCAPE} {BACKSPACE}\r\n {TAB} {PRTSCN} {PAUSE} {SPACE} {CAPSLOCK} {NUMLOCK} {SCROLLLOCK}"
"Direction key tags:\t\t{UP} {DOWN} {LEFT} {RIGHT}\r\nFunction key tags:\t\t{F1, F2, F3 ... F24}\r\nVolume key tags:\t\t{VOL+}, {VOL-}, {MUTE}\r\nMouse button tags:\t\t{LMB}, {RMB}, {MMB}, {MB4/XMB1}, {MB5/XMB2}\r\nMouse wheel tags:\t\t{MWUP}, {MWDN}, {TILTL}, {TILTR}\r\nNumeric keypad tags:\t{NUM0-NUM9} {NUM+} {NUM-} {NUM.} {NUM/} {NUM*}\r\nWeb/Browser keys:\t\t{BACK}, {FORWARD}, {STOP}, {REFRESH}, {WEBHOME},\r\n\t\t\t{SEARCH}, {FAVORITES}\r\nToggle keys:\t\t{NUMLOCKON}, {NUMLOCKOFF}, {CAPSLOCKON}\r\n\t\t\t{CAPSLOCKOFF}, {SCROLLLOCKON}, {SCROLLLOCKOFF}" => "æ–¹å‘éµæ¨™ç±¤:\t\t{UP} {DOWN} {LEFT} {RIGHT}\r\n功能éµæ¨™ç±¤:\t\t{F1, F2, F3 ... F24}\r\n音é‡éµæ¨™ç±¤:\t\t{VOL+}, {VOL-}, {MUTE}\r\næ»‘é¼ æŒ‰éµæ¨™ç±¤:\t\t{LMB}, {RMB}, {MMB}, {MB4/XMB1}, {MB5/XMB2}\r\næ»‘é¼ æ»¾è¼ªæ¨™ç±¤:\t\t{MWUP}, {MWDN}, {TILTL}, {TILTR}\r\n數å—éµç›¤æ¨™ç±¤:\t{NUM0-NUM9} {NUM+} {NUM-} {NUM.} {NUM/} {NUM*}\r\nç€è¦½å™¨æ¨™ç±¤:\t\t{BACK}, {FORWARD}, {STOP}, {REFRESH}, {WEBHOME},\r\n\t\t\t{SEARCH}, {FAVORITES}\r\n切æ›éµæ¨™ç±¤:\t\t{NUMLOCKON}, {NUMLOCKOFF}, {CAPSLOCKON}\r\n\t\t\t{CAPSLOCKOFF}, {SCROLLLOCKON}, {SCROLLLOCKOFF}"
"For example:\r\n To close a window: {ALT}{F4}\r\n To select all items: {CTRL}A\r\n To type bold 'my text' in Microsoft Word: {CTRL}bmy text{CTRL}b\r\n To send an 'r' key with a 50ms delay between the down and up, {WAITMS50}r\r\n To turn OFF numlock, {NUMLOCKOFF}" => "例如:\r\n 關閉視窗: {ALT}{F4}\r\n å…¨é¸ç‰©ä»¶: {CTRL}A\r\n 在Microsoft Word 輸入粗體 'my text': {CTRL}bmy text{CTRL}b\r\n é€å‡ºä¸€å€‹å»¶é²50毫秒的'r'éµï¼Œ {WAITMS50}r\r\n 關閉數å—éµç›¤ï¼Œ {NUMLOCKOFF}"
# -- Updated in 2.4 Beta 10 --
"NOTE: To avoid lag when using the {WAIT}, {WAITMS}, {HOLD} or {HOLDMS} tags, try using the threaded\r\nsend methods in the dropdown above." => "æ示: 為é¿å…使用 {WAIT}, {WAITMS}, {HOLD} 或 {HOLDMS} é€ æˆçš„延é²ç¾è±¡ï¼Œè«‹ä½¿ç”¨ä¸Šè¿°æ–¹æ³•ã€‚"
# -- Updated in 2.4 Beta 15 --
"Special function tags:\t{WAIT<n>} inserts a delay of <n> seconds.\r\n\t\t\t{WAITMS<n>} inserts a delay of <n> milliseconds.\r\n\t\t\t{HOLD<n>} holds the next key down for <n> seconds.\r\n\t\t\t{HOLDMS<n>} holds the next key down for <n> milliseconds.\r\n\t\t\t{VKC:<n>} Sends the specified virtual key code.\r\n\t\t\t{EXT:<n>} Sends the specified extended virtual key code.\r\n\t\t\t{CLEAR} Clears any modifier tags {CTRL},{ALT} etc." => "特殊功能標籤:\t{WAIT<n>} 輸入一個 <n> 秒延é²ã€‚\r\n\t\t\t{WAITMS<n>} 輸入一個 <n> 毫秒延é²ã€‚\r\n\t\t\t{HOLD<n>} 按ä½ä¸‹ä¸€å€‹æŒ‰ä¸‹çš„æŒ‰éµ <n> 秒。\r\n\t\t\t{HOLDMS<n>} 按ä½ä¸‹ä¸€å€‹æŒ‰ä¸‹çš„æŒ‰éµ <n> 毫秒。\r\n\t\t\t{VKC:<n>} é€å‡ºä¸€å€‹æŒ‡å®šçš„虛擬éµç¢¼ã€‚\r\n\t\t\t{EXT:<n>} é€å‡ºä¸€å€‹æŒ‡å®šçš„延伸虛擬éµç¢¼ã€‚\r\n\t\t\t{CLEAR} 清除任何組åˆæ¨™ç±¤å¦‚ {CTRL},{ALT}ç‰ç‰ã€‚"
#Run Application dialog
"Type the name of a program, folder, document or internet resource, and XMouse button will open it for you when the button is pressed." => "輸入程å¼ã€è³‡æ–™å¤¾ã€æ–‡ä»¶æˆ–是網å€åç¨±ï¼Œç•¶æ»‘é¼ æŒ‰ä¸‹æ™‚Xmouse會為您打開。"
#Scrolling tab
"&Invert mouse wheel scrolling" => "å轉滾輪滾動方å‘"
"I&nvert mouse horizontal (tilt) scrolling" => "å轉滾輪左å³æ»¾å‹•æ–¹å‘"
"Wheel scrolls i&n pages instead of lines" => "滾輪滾動一é "
"Lines to scroll using the scroll wheel:" => "滾輪滾動行數"
"Enable a&xis locking modifier keys" => "啟用軸鎖定組åˆéµ"
"Advanced Window Scrolling" => "進階視窗滾動"
"&Scroll Method" => "滾動方法"
"&Vertical Lines" => "垂直行數"
"&Horizontal characters" => "æ°´å¹³å—å…ƒ"
"Method 1 (SCROLL Msg)" => "方法1 (滾動訊æ¯)"
"Method 2 (ScrollInfo)" => "方法2 (滾動資訊)"
"Method 3 (Left/Right Keys)" => "方法3 (å·¦/å³éµ)"
"Method 4 (Wheel Msg)" => "方法4 (滾輪訊æ¯)"
"Method 5 (WPF Scroll Msg)" => "方法5 (WPF 滾動訊æ¯)"
"None (Disable Scroll)" => "ç„¡ (ç¦ç”¨æ»¾è¼ª)"
#About Dialog
"XML support provided by XML++ from Michael at turboirc.com" => "XML 支æŒç”± XML++ æ供,來自 turboirc.com çš„ Michael"
"XMBC is distributed freely (with no warranty or guarantee) for the use of anyone, anywhere. If you like XMBC and wish to show your appreciation please feel free to make a donation by clicking the PayPal button below." => "XMBC å¯ä»¥è¢«è‡ªç”±åˆ†ç™¼ï¼Œå¦‚æžœä½ å–œæ¡ XMBC å¯ä»¥éš¨æ„é€éŽä»¥ä¸‹ paypal 按鈕æ贈。"
"More information can be found on my download page or user forums." => "更多訊æ¯å¯ä»¥åƒè¨ªæˆ‘的下載é é¢å’Œè«–壇。"
"Homepage" => "首é "
"Donate" => "æè´ˆ"
"Forums" => "論壇"
# -- Added in 2.4 Beta 15 --
"About" => "關於"
"Version" => "版本"
"This application is designed and written by %s of %s." => "該應用由 %s of %s è¨è¨ˆå’Œé–‹ç™¼ã€‚" # NOTE: The %s are replace at runtime
# --
#Find Window Dialog
"Find Window" => "尋找視窗"
"Find Method" => "尋找方法"
"Click and drag the window finder icon to the window you want to select." => "點擊和拖曳視窗尋找圖示到您想é¸æ“‡çš„視窗上。"
"Hover" => "劃éŽ"
"Move the mouse over the window you want to select && turn on CAPS LOCK to lock the window details in place." => "ç§»å‹•æ»‘é¼ åˆ°æ‚¨æƒ³é¸æ“‡çš„視窗並打開 CAPS LOCK 來鎖定視窗細節訊æ¯ã€‚"
"You can also manually enter/edit the window details below." => "您å¯ä»¥æ‰‹å‹•è¼¸å…¥æˆ–編輯視窗細節訊æ¯"
"Window Details" => "視窗細節"
"Caption" => "說明"
"Handle" => "控制代碼"
"&Process" => "程åº"
"C&lass" => "é¡ž"
"Pa&rent Class" => "父類"
"Only match if there is no parent class." => "僅匹é…沒有父類"
"NOTE: The fields can be empty which will match ALL (*) windows (unless you tick the checkbox for empty parent class). When set, the text must match that of the window's properties." => "æ示: 這些欄ä½å¯ä»¥ä¿æŒç©ºç™½ï¼Œè€Œæœƒå¥—用到全部視窗上(除éžæ‚¨å‹¾é¸è¤‡é¸æ¡†ç‚ºç©ºçš„父類)。當è¨ç½®å®Œæˆæ™‚ï¼Œæ–‡æœ¬å¿…é ˆç¬¦åˆè¦–窗的屬性。"
#Choose Application dialog (custom window profile)
"Choose Application" => "é¸æ“‡æ‡‰ç”¨"
"Select from the list of running applications:" => "從下列é‹è¡Œçš„應用程å¼é¸å–:"
"Or type in/browse to the application executable (.EXE) file" => "或是輸入或ç€è¦½ä¸€å€‹å¯åŸ·è¡Œçš„應用程å¼"
"Application" => "應用程å¼"
"&Specific Window" => "特定視窗"
# -- Added in 2.4 Beta 15 --
"&Refresh" => "é‡æ–°æ•´ç†"
"Process Name" => "程åºå稱"
"Window Title" => "視窗å稱"
# --
#Errors/Message boxes
"Please close the settings dialog in order to fully apply your language selection." => "請關閉è¨ç½®å°è©±çª—以套用語言。"
"The specified application already exists.\nYou can not add two entries for the same application." => "指定應用程å¼å·²å˜åœ¨ã€‚\n您ä¸èƒ½åŒæ™‚新增兩個相åŒæ¢ç›®çš„應用程å¼ã€‚"
"You must select a profile to remove!" => "æ‚¨å¿…é ˆé¸æ“‡ä¸€å€‹é…置移除!"
"You can not edit the default profile!" => "您ä¸èƒ½ç·¨è¼¯é è¨é…ç½®!"
"You can not remove the default profile!" => "您ä¸èƒ½ç§»é™¤é è¨é…ç½®!"
"You must select a profile to edit." => "æ‚¨å¿…é ˆé¸æ“‡ä¸€å€‹é…置編輯"
"The specified window configuration is invalid!" => "指定視窗è¨å®šç„¡æ•ˆ!"
"The specified profile already exists.\nYou can not add two profile entries for the same application/window." => "指定é…置已å˜åœ¨ã€‚\n您ä¸èƒ½åŒæ™‚新增兩個相åŒé…置的æ¢ç›®åœ¨åŒä¸€æ‡‰ç”¨ç¨‹å¼ä¸ã€‚"
"You must select an application to copy." => "æ‚¨å¿…é ˆé¸æ“‡æ‡‰ç”¨ç¨‹å¼è¤‡è£½ã€‚"
"Do you want to save the changes you have made to the configuration?\n\nWarning: If you say 'No', any changes will be lost!" => "您è¦å„²å˜æ›´å‹•çš„è¨å®šå—Ž?\n\nè¦å‘Š: 如果é¸æ“‡ã€Œå¦ã€æœƒå¤±åŽ»æ‰€æœ‰æ›´å‹•!"
"Do you want to overwrite proflie" => "您è¦è¦†è“‹é…置嗎?"
"The selected file is not a valid settings file." => "é¸æ“‡çš„檔案是無效的è¨å®šæ–‡ä»¶ã€‚"
"The log file can not be opened as it does not exist." => "日誌檔案ä¸å˜åœ¨ï¼Œç„¡æ³•é–‹å•Ÿã€‚"
"is unable to open the log file" => "無法開啟日誌檔案"
"Unable to save the desktop icons using your current shell and this version of" => "無法使用當å‰æ®¼å±¤å’Œæ¤ç‰ˆæœ¬å„²å˜æ¡Œé¢é…ç½®"
"Unable to restore the desktop icons using your current shell and this version of" => "無法使用當å‰æ®¼å±¤å’Œæ¤ç‰ˆæœ¬å›žå¾©æ¡Œé¢é…ç½®"
# -- Updated in v2.4 Beta 14 --
"There is a new version available!" => "有新版本å¯ç”¨!"
"A new version is available." => "有新版本å¯ç”¨ã€‚"
"Click the 'Homepage' button to go and download it." => "點擊「首é ã€ä¸‹è¼‰"
"There is a new beta version available!" => "有新的測試版本å¯ç”¨!"
"A new beta version is available." => "有新的測試版本å¯ç”¨ã€‚"
"Click the 'Forums' button to go and download it." => "點擊「論壇ã€ä¸‹è¼‰"
# --
"You have to select or enter a process name, or press cancel." => "æ‚¨å¿…é ˆé¸æ“‡æˆ–輸入一個程åºå稱,或是å–消。"
"Enabling debug logging will decrease the performance of the mouse. It is recommended that you only enable this temporarily to assist in problem finding. s such, the debug setting will not be saved." => "開啟除錯日誌會é™ä½Žæ»‘é¼ æ•ˆèƒ½ï¼Œå»ºè°åªæœ‰åœ¨å°‹æ‰¾éŒ¯èª¤è¨Šæ¯æ™‚開啟。除錯è¨å®šå°‡ä¸æœƒè¢«å„²å˜ã€‚"
"Are you sure you want to enable debug logging?", => "您確定è¦å•Ÿç”¨é™¤éŒ¯æ—¥èªŒ?"
"Please be aware that checking if a mouse message is 'non-client', in order to determine if it should be ignored or not, much more processing is required." => "請注æ„æª¢æŸ¥æ»‘é¼ è¨Šæ¯æ˜¯å¦ç‚ºã€Œéžå®¢æˆ¶ç«¯ã€ï¼Œä»¥æ±ºå®šæ˜¯å¦è©²å¿½ç•¥å®ƒã€‚需è¦æ›´å¤šè™•ç†ã€‚"
"This can slow down mouse operation in general, sometimes causing strange results." => "這會é™ä½Žä¸€èˆ¬æ»‘é¼ æ“ä½œï¼Œæœ‰æ™‚æœƒé€ æˆæ„外的çµæžœã€‚"
"Are you sure you want to ignore non-client messages?" => "您確定è¦å¿½ç•¥éžå®¢æˆ¶ç«¯è¨Šæ¯å—Ž?"
"By default, the icon in the system tray (by the clock) is always shown. If you turn this off, there will be no icon in the system tray by default." => "在é è¨æƒ…æ³ä¸‹ï¼Œåœ¨ç³»çµ±é€šçŸ¥å€åŸŸçš„圖示為顯示圖示與通知。如果您關閉它,在系統通知å€åŸŸçš„圖示將會é è¨ç‚ºé—œé–‰ã€‚"
"To restore the icon, you can run the program again from your start menu. This will force the icon to be displayed temporarily, allowing you to access this setup screen." => "回復圖示時,您å¯ä»¥å¾žé–‹å§‹å¾žæ–°å•Ÿå‹•ç¨‹å¼ã€‚這å¯ä»¥å¼·åˆ¶ä½¿åœ–示出ç¾ä¸€æ®µæ™‚間,讓您å¯ä»¥é€²å…¥è¨å®šé é¢èª¿æ•´ã€‚"
#Balloon popup windows
"Debugging enabled" => "啟動除錯"
"Debugging disabled" => "關閉除錯"
"Successfully saved desktop icon positions" => "æˆåŠŸå„²å˜æ¡Œé¢å¸ƒå±€"
"Successfully restored desktop icon positions" => "æˆåŠŸå¾©åŽŸæ¡Œé¢å¸ƒå±€"
"Mouse button re-mapping is now disabled" => "æ»‘é¼ æŒ‰éµé‡ç¹ªå·²ç¦ç”¨"
"Mouse button re-mapping is now enabled" => "æ»‘é¼ æŒ‰éµé‡ç¹ªå·²å•Ÿå‹•"
# Actions (displayed in the dropdown lists)
"Left Click" => "點擊左éµ"
"Right Click" => "點擊å³éµ"
"Next Window" => "下一視窗"
"Back" => "後退"
"Forward" => "å‰é€²"
"Middle Click" => "點擊ä¸éµ"
"Disable" => "ç¦ç”¨"
"Close (Alt+F4)" => "關閉(Alt+F4)"
"Copy (Ctrl+C)" => "複製(Ctrl+C)"
"Cut (Ctrl+X)" => "剪下(Ctrl+X)"
"Double Click" => "雙擊"
"Enter" => "輸入"
"Maximize Window" => "最大化視窗"
"Minimize Window" => "最å°åŒ–視窗"
"New" => "新增"
"Open" => "打開"
"Paste (Ctrl+V)" => "貼上(Ctrl+V)"
"Redo (Ctrl+Y)" => "é‡åš(Ctrl+Y)"
"Show/Hide Desktop" => "顯示/éš±è— æ¡Œé¢"
"Undo (Ctrl+Z)" => "還原(Ctrl+Z)"
"Media - Mute" => "媒體 - éœéŸ³"
"Media - Volume Up" => "媒體 - å¢žåŠ éŸ³é‡"
"Media - Volume Down" => "媒體 - 減少音é‡"
"Media - Next Track" => "媒體 - 下一首"
"Media - Last Track" => "媒體 - 最後一首"
"Media - Stop" => "媒體 - åœæ¢"
"Media - Play/Pause" => "媒體 - æ’放/æš«åœ"
"Launch EMail" => "打開電å郵件"
"Simulated Keys" => "模擬按éµ"
"Lock Workstation" => "鎖定工作站"
"Open Explorer" => "打開管ç†å™¨"
"Open RUN Command" => "打開命令列"
"Restore Window" => "回復視窗"
"Escape" => "å–消"
"Open Help" => "打開幫助"
"Open Web Browser" => "打開ç€è¦½å™¨"
"Browser Stop" => "ç€è¦½å™¨åœæ¢"
"Browser Refresh" => "ç€è¦½å™¨é‡æ–°æ•´ç†"
"Open Search" => "é–‹å•Ÿæœå°‹"
"Browser Favorites" => "查看我的最愛"
"** No Change (Don't intercept) **" => "** ä¸ä¿®æ”¹(ä¸æ””截) **"
"Run Application" => "打開應用程å¼"
"Mouse Wheel Up" => "æ»‘é¼ æ»¾è¼ªå‘上"
"Mouse Wheel Down" => "æ»‘é¼ æ»¾è¼ªå‘下"
"Print Screen" => "螢幕截圖"
"Print Active Window" => "當å‰æ´»å‹•è¦–窗截圖"
"Sticky Left Button [Click-Drag]" => "相é»å·¦éµ(點擊拖放)"
"Sticky Right Button" => "相é»å³éµ"
"Sticky Middle Button" => "相é»ä¸éµ"
"Layer (Next)" => "層(下一個)"
"Layer (Previous)" => "層(上一個)"
"Layer 1" => "層 1"
"Layer 2" => "層 2"
"Layer 3" => "層 3"
"Layer 4" => "層 4"
"Layer 5" => "層 5"
"Open Explorer at specified folder" => "開啟指定資料夾"
"Open Explorer at My Documents" => "開啟我的文件"
"Open Explorer at My Computer" => "開啟我的電腦"
"Open Explorer at Network Favourites" => "開啟網路最愛"
"Open Control Panel" => "開啟控制é¢æ¿"
"Double Click Drag" => "雙擊拖曳"
"Mouse Wheel Tilt Left" => "滾輪左傾"
"Mouse Wheel Tilt Right" => "滾輪å³å‚¾"
"Scroll Window Up" => "視窗上æ²"
"Scroll Window Down" => "視窗下æ²"
"Scroll Window Left" => "視窗左æ²"
"Scroll Window Right" => "視窗å³æ²"
"Previous Window" => "å‰ä¸€å€‹çª—å£"
"Activate Screensaver" => "啟動螢幕ä¿è·ç¨‹å¼"
"Activate Monitor Power Saving" => "啟動螢幕çœé›»æ¨¡å¼"
"** Same As Default Profile **" => "** 和默èªé…ç½®ç›¸åŒ **"
"Sticky 4th Button" => "相é»ç¬¬ 4 按éµ"
"Sticky 5th Button" => "相é»ç¬¬ 5 按éµ"
"Change Movement to Scroll" => "修改移動為æ²å‹•"
"Change Movement to Scroll (Sticky)" => "修改移動為æ²å‹•(相é»)"
"Sticky Left Button [Click-Drag] X-Axis" => "相é»å·¦éµ(點擊拖放) X 軸"
"Sticky Left Button [Click-Drag] Y-Axis" => "相é»å³éµ(點擊拖放) Y 軸"
# -- Updated in 2.4 Beta 12 --
"Flip 3D" => ""
"ALT-TAB" => ""
"Show sidebar" => "顯示å´é‚Šæ””"
"Reveal Desktop" => "顯示桌é¢" # -- Added in 2.4 Beta 12 -- same action as Show sidebar
"** Same As Layer 1 (current profile) **" => "** 和層 1 (當å‰é…ç½®)相åŒ**" # -- Added in 2.4 Beta 12 --
# -- Updated in 2.4 Beta 15 --
"Layer Modifier Revert" => "回復層修改"