hi,
I'm trying to get health monitoring (voltage,temperature,fan speed) information of ASUS NCL-DE motherboard. The monitoring chip used in this board is W83792D. SmBus base address of the chip is 0x400 and slave address is 5E as per the datasheet of this particular chip.
Bt i'm unable to retrieve the informations .I tried with drivers InpOut32,IOAccess,Dlpotio etc.
please help me to solve this issue.
regards,
Hridya
Healthmonitoring Using W83792D
Hi there,
Soryy it took a while to reply - Ive not been monitoring the forums as much as I should!
Im not sure if I cant help with this, because I'm not sure InpOutx64 is going to do what your looking for... I'm not familier with this type of port reading - do you get anything out at all?
Maybe I can look into this but don't hold your breath because its a bit beyond me Is the chip accessible through the DOS (BIOS) address 0x400? ie. Can you read it uing 32bit windows with the programs you mentioned?
My port of InpOut is simply to allow it to work on Windows XP 64bit - its not clear from your post if you are using 64bit window?
Thanks,
Phil
Soryy it took a while to reply - Ive not been monitoring the forums as much as I should!
Im not sure if I cant help with this, because I'm not sure InpOutx64 is going to do what your looking for... I'm not familier with this type of port reading - do you get anything out at all?
Maybe I can look into this but don't hold your breath because its a bit beyond me Is the chip accessible through the DOS (BIOS) address 0x400? ie. Can you read it uing 32bit windows with the programs you mentioned?
My port of InpOut is simply to allow it to work on Windows XP 64bit - its not clear from your post if you are using 64bit window?
Thanks,
Phil
--[ Phil ]--
--[ Administrator & XMBC Author ]--
Logitech G9/G604/M720/MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, AMD Ryzen 5900x, MSI x570 Tomahawk, 32GB DDR4,
nVidia RTX 2070s, Evo 970 1Tb NVME, 2x2TB WD Black (RAID1)
--[ Administrator & XMBC Author ]--
Logitech G9/G604/M720/MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, AMD Ryzen 5900x, MSI x570 Tomahawk, 32GB DDR4,
nVidia RTX 2070s, Evo 970 1Tb NVME, 2x2TB WD Black (RAID1)
Re: Healthmonitoring Using W83792D
Ok, today I got an email from Logix4U with the source code for HWInterface.
So at some point in the not too distant future I will have a look at porting them to x64. Hopefully it will be as easy as InpOut32!
_____________________________
dhoom
So at some point in the not too distant future I will have a look at porting them to x64. Hopefully it will be as easy as InpOut32!
_____________________________
dhoom
Re: Healthmonitoring Using W83792D
Wow you got an email from Logix4U? Well done!
But the sources for hwinterface (my x64 port) were already available on my website?!!!
But the sources for hwinterface (my x64 port) were already available on my website?!!!
--[ Phil ]--
--[ Administrator & XMBC Author ]--
Logitech G9/G604/M720/MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, AMD Ryzen 5900x, MSI x570 Tomahawk, 32GB DDR4,
nVidia RTX 2070s, Evo 970 1Tb NVME, 2x2TB WD Black (RAID1)
--[ Administrator & XMBC Author ]--
Logitech G9/G604/M720/MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, AMD Ryzen 5900x, MSI x570 Tomahawk, 32GB DDR4,
nVidia RTX 2070s, Evo 970 1Tb NVME, 2x2TB WD Black (RAID1)