Highrez

OK good news.

On x64 windows, it can only load x64 drivers. That is why InpOut x64 was born. The driver should be automatically copied to the system32 folder thought when the DLL is first loaded, so I'm a little surprised you had to manually copy it across.

Thanks, I will see if I can modify the DLL sometimes over xmas but no promises

Thanks,
Phil

I've just had confirmation that InpOut32/x64 works with the StarTech PE1XP Parallel Port card on port address 'D010'.

Thanks to Michael Tracy for letting me know.

inpout32.dll even work under win 8..

I recenly installed win 8 in my computer, and I also bought a PCI to Parallal card.
In order to have the inpout32.dll to work follow these steps:
1. Make sure you installed the PCI divers in the operating system (comes with the card).
2. Make sure you have the latest inpout32.dll version (which enables the support of long adress numbers).
3. Make sure that you modify your code to the new adress, in order to do that, go to the device manager, and
see what address your PCI card occupies - now modify this number in your code.
4. You are done.

Works OK on SIIG CyberPro Parallel Port card on Windows 7 machine with 64 bit operating system.
Using the following drivers:-
SIIG driver version 1.3.2.1
Inpout32 installer version 1.4.0.0
Inpoutx64.dll version 1.5.0.0