Hello Phil
first thanks to you and people at Logix4U for preparing InpOut32.DLL,
I used this DLL before for accessing the Parallel port successfully and easily.( port Address 0x378 )
But now I can not use it for accessing the serial ports address(0x3F8-0x3FF & 0x2F8-0x2FF) and they returns 0xFF totally by calling Inp32() function. I am using a USB to RS232 converter, because my notebook has not serial port connector.
Do you have any Idea to solve this problem?
thanks and best regards
Ali
A problem with InpOut32.Dll
Re: A problem with InpOut32.Dll
Hi,
As far as I know, ImpOut does not (and never has) supported USB interfaces. There is not a lot I can do about that because I dont have any knowledge about drivers (I just made the code 64bit compliant and built it using the MS 64bit DDK).
You need to ask this question of Logix4U.
I suspect he will say its not possible
Thanks,
Phil
As far as I know, ImpOut does not (and never has) supported USB interfaces. There is not a lot I can do about that because I dont have any knowledge about drivers (I just made the code 64bit compliant and built it using the MS 64bit DDK).
You need to ask this question of Logix4U.
I suspect he will say its not possible
Thanks,
Phil
--[ Phil ]--
--[ Administrator & XMBC Author ]--
Logitech G9/G604/M720/MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, AMD Ryzen 5900x, MSI x570 Tomahawk, 32GB DDR4,
nVidia RTX 2070s, Evo 970 1Tb NVME, 2x2TB WD Black (RAID1)
--[ Administrator & XMBC Author ]--
Logitech G9/G604/M720/MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, AMD Ryzen 5900x, MSI x570 Tomahawk, 32GB DDR4,
nVidia RTX 2070s, Evo 970 1Tb NVME, 2x2TB WD Black (RAID1)