Highrez

XMBC Version: 2.18.7
Windows Version: W10 1809

Clear description of the problem:

Ingame I have dash - bound to AIM.
<My custom key-command>
Sim-LMB: {ACTIVATE}-
Only send if profile's active: Checked.
Block original mouse input: Unchecked.
Randomise auto repeat delay by 10%: Checked (Dont know why really, always had it checked).

In PUBG there are two different ways of aiming, one is the regular "aim down sight"(ADS) and the second one is "aimed hip-fire"(AIM). What I want is to be able to use the left mouse button(LMB) for both fire and AIM(In panic mode situation) and the right button as regular with ADS. The problem which I have occures when I ADS and try to shoot while in ADS, then it goes right into AIM and and I lose the ADS. So what I want to know is if there is any way of "Ignoring" the sim-command if the right mouse button(RMB) is pressed.

I don't think this is currently possible, but can I clarify....

While you are pressing (holding) the RIGHT button, if you press the LEFT button you want it to ignore the setting and send a normal left click?
Actually this may be possible with layers and simkeys but it might get tricky/unreliable... I will have to have a play around and see. It might be more reliable to add an option in the simkey window to only send if no other button is currently pressed or something (assuming my understanding is correct?)

Thanks,
Phil

phil wrote: ↑Thu May 09, 2019 3:57 pm I don't think this is currently possible, but can I clarify....

While you are pressing (holding) the RIGHT button, if you press the LEFT button you want it to ignore the setting and send a normal left click?
Actually this may be possible with layers and simkeys but it might get tricky/unreliable... I will have to have a play around and see. It might be more reliable to add an option in the simkey window to only send if no other button is currently pressed or something (assuming my understanding is correct?)

Thanks,
Phil

Ah, I see! Yes, from what you have said you recon you have understood it correctly. Im gonna try the layer-trick and bind layer 2 to the RMB.

Im not sure how how you would do the "press if no other buttons are pressed" version.

//Flugan

I just tried out using sim-keys to change layer and it works perfectly! Thanks for the help!

Flugan wrote: ↑Thu May 09, 2019 5:12 pm Ah, I see! Yes, from what you have said you recon you have understood it correctly. Im gonna try the layer-trick and bind layer 2 to the RMB.

Its a bit more complicated than that... You will need to use simulated keystrokes, and send {RMB} followed by {LAYER2} with "during" selected.
That might work but I need to try it here to be sure if its suitable or not (of course you can try it too!)

Flugan wrote: ↑Thu May 09, 2019 5:12 pm Im not sure how how you would do the "press if no other buttons are pressed" version.
//Flugan

You wouldnt right now - that will require a software change - so XMBC would check first that no buttons are pressed before seimulating the configured item - and if a button is pressed, it will ignore the configured item and let the button pass through as normal (not remapped). Not sure how "easy" that will be to do but its worth considering if the layer trick does not work.