Healthmonitoring Using W83792D

My x64 port of InpOut32
Post Reply
hridya
New User
Posts: 2
Joined: Mon Jul 31, 2006 9:16 am

Healthmonitoring Using W83792D

Post by hridya » Mon Jul 31, 2006 9:28 am

hi,
I'm trying to get health monitoring (voltage,temperature,fan speed) information of ASUS NCL-DE motherboard. The monitoring chip used in this board is W83792D. SmBus base address of the chip is 0x400 and slave address is 5E as per the datasheet of this particular chip.
Bt i'm unable to retrieve the informations .I tried with drivers InpOut32,IOAccess,Dlpotio etc.
please help me to solve this issue.

regards,
Hridya

User avatar
phil
Site Admin
Posts: 5457
Joined: Sun Apr 06, 2003 11:12 pm

Post by phil » Thu Aug 10, 2006 1:16 am

Hi there,

Soryy it took a while to reply - Ive not been monitoring the forums as much as I should!

Im not sure if I cant help with this, because I'm not sure InpOutx64 is going to do what your looking for... I'm not familier with this type of port reading - do you get anything out at all?

Maybe I can look into this but don't hold your breath because its a bit beyond me :( Is the chip accessible through the DOS (BIOS) address 0x400? ie. Can you read it uing 32bit windows with the programs you mentioned?

My port of InpOut is simply to allow it to work on Windows XP 64bit - its not clear from your post if you are using 64bit window?

Thanks,
Phil
--[ Phil ]--
--[ Administrator & XMBC Author ]--
Logitech G9, Logitech MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, Intel i5-6600k, Asus 170-A, 16GB DDR4,
nVidia GeForce GTX 970, 2xEvo 850 (RAID 0), 2x2TB WD Black (RAID1)

hridya
New User
Posts: 2
Joined: Mon Jul 31, 2006 9:16 am

Post by hridya » Thu Aug 10, 2006 5:15 am

Hi ,
Thank you very much for your help. In 32 bit OS only i encountered problem.I updated the BIOS and now i'm able to do with IOACCESS dll itself .

Dhoom
New User
Posts: 1
Joined: Mon Oct 27, 2014 1:42 pm

Re: Healthmonitoring Using W83792D

Post by Dhoom » Mon Oct 27, 2014 1:48 pm

Ok, today I got an email from Logix4U with the source code for HWInterface.

So at some point in the not too distant future I will have a look at porting them to x64. Hopefully it will be as easy as InpOut32!


_____________________________
dhoom

User avatar
phil
Site Admin
Posts: 5457
Joined: Sun Apr 06, 2003 11:12 pm

Re: Healthmonitoring Using W83792D

Post by phil » Mon Oct 27, 2014 9:28 pm

Wow you got an email from Logix4U? Well done!
But the sources for hwinterface (my x64 port) were already available on my website?!!!
--[ Phil ]--
--[ Administrator & XMBC Author ]--
Logitech G9, Logitech MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, Intel i5-6600k, Asus 170-A, 16GB DDR4,
nVidia GeForce GTX 970, 2xEvo 850 (RAID 0), 2x2TB WD Black (RAID1)

Post Reply