I have upgraded the board - please let me know if you have any problems

Tap to Click

x64 Replacement/Alternative to Microsoft's IntelliMouse application.
Post Reply
Bullstrode35
New User
Posts: 3
Joined: Fri Jun 01, 2012 12:34 pm

Tap to Click

Post by Bullstrode35 » Fri Jun 01, 2012 12:49 pm

Sorry if this is a silly question, can't find it in the FAQ or elsewhere.

Very simply, is it possible to use X-Mouse to implement a tap to click conversion, for example tap left on a mouse (e.g. Magic Mouse) to signal a mouse left click? I can't find the facilty anywhere for Windows although Apple have it courtesy of BetterTouchTool.

Thanks - B35

User avatar
phil
Site Admin
Posts: 4974
Joined: Sun Apr 06, 2003 11:12 pm

Re: Tap to Click

Post by phil » Fri Jun 01, 2012 4:24 pm

Sorry I'm confused... Are you talking about a touchpad?
Surly when you "tap" a mouse button it does click?

What is the difference between a tap and a click?

PS. This really belongs in the XMBC forum so I'll probably move it there :)

Thanks,
Phil
--[ Phil ]--
--[ Administrator & XMBC Author ]--
Logitech G9, Logitech MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, Intel i5-6600k, Asus 170-A, 16GB DDR4,
nVidia GeForce GTX 970, 2xEvo 850 (RAID 0), 2x2TB WD Black (RAID1)

Bullstrode35
New User
Posts: 3
Joined: Fri Jun 01, 2012 12:34 pm

Re: Tap to Click

Post by Bullstrode35 » Fri Jun 01, 2012 11:01 pm

Thanks for the quick response Phil ....

Yes, there is a difference on some mice (... and yes, I do mean mice not trackpads). For example, on the Magic Mouse (using this Apple mouse on a Windows 'bootcamp' partition of an Apple laptop), the click is a more ponderous physical depression of the mouse's top surface, a tap is just a finger hit on the same surface with no physical movement of the mouse. The former is more suitable for eureka moments, the latter for higher frequency use.

In that situation, using a Magic Mouse in bootcamp, X-Mouse does intercept signals for (physical) clicks - and also for swipes which are wheel substitutes. It would be a great leap forward for many Mac users who partition to use both Windows and Mac if they can use the same mouse & protocols, hence my question - unashamedly selfish but globally there must be tens of thousands like me ...

with thanks
B35

User avatar
phil
Site Admin
Posts: 4974
Joined: Sun Apr 06, 2003 11:12 pm

Re: Tap to Click

Post by phil » Sat Jun 02, 2012 12:45 am

I don't think your the first with this device, but unfortunately, if the mouse driver does not send the messages through to windows, then there is little I (XMBC) can do. XMBC simply remaps windows messages so if no windows message is generated, then it cant remap it!

It sounds like its going to require driver support (from Apple????) all I can say is good luck with that one ;)

Having said that, it might be quite a useful device for my virtual Mac OSX Lion/iPhone development!

Phil
--[ Phil ]--
--[ Administrator & XMBC Author ]--
Logitech G9, Logitech MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, Intel i5-6600k, Asus 170-A, 16GB DDR4,
nVidia GeForce GTX 970, 2xEvo 850 (RAID 0), 2x2TB WD Black (RAID1)

Bullstrode35
New User
Posts: 3
Joined: Fri Jun 01, 2012 12:34 pm

Re: Tap to Click - Workaround for Boot Camp

Post by Bullstrode35 » Sun Jun 03, 2012 2:40 am

Hi Phil,

I think I've found a workaround using your current X-Mouse version.

By using the X-Mouse Setup menu as means of seeing what signals are being registered, I found that the swipes for left and right wheel tilt are being received. Since these gestures can be made at the front of the Magic Mouse, it's possible to redefine them and use them as left and right clicks. (... I never use wheel tilt anyway).

Whilst there's a slight difference between a swipe and a tap, it's much less than their difference with the Magic Mouse's necessarily more ponderous click.

Thanks for your time. Hope this helps others too,

Cheers,

B35

User avatar
phil
Site Admin
Posts: 4974
Joined: Sun Apr 06, 2003 11:12 pm

Re: Tap to Click

Post by phil » Sun Jun 03, 2012 9:12 pm

Thanks for the information. I hope others will find it useful.

EDIT: And thanks for the donation :)

Phil
--[ Phil ]--
--[ Administrator & XMBC Author ]--
Logitech G9, Logitech MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, Intel i5-6600k, Asus 170-A, 16GB DDR4,
nVidia GeForce GTX 970, 2xEvo 850 (RAID 0), 2x2TB WD Black (RAID1)

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 3 guests