Using CTRL modifier

x64 Replacement/Alternative to Microsoft's IntelliMouse application.
Post Reply
lefty
New User
Posts: 1
Joined: Sat Apr 08, 2017 2:11 pm

Using CTRL modifier

Post by lefty » Sat Apr 08, 2017 4:06 pm

Sorry if this has been answered before, but I did not find a solution.

I am one armed and have a 7 button EX-G trakball mouse. For one of the software packages I use frequently at work, I need to do a CTRL-left click. My thought was that I would program one of the buttons to hold CTRL while I clicked. I tried this:

{CTRL} as the custom key and set it to option 3 During. Then, I hold the button I am modifying and click left once.

It doesn't seem to give me the desired result of CTRL-click. Any thoughts?

Thanks,
Bryce

User avatar
phil
Site Admin
Posts: 5195
Joined: Sun Apr 06, 2003 11:12 pm

Re: Using CTRL modifier

Post by phil » Mon Apr 10, 2017 8:00 am

Hi Bryce,

That should work. There are several things to try. Firstly, you could trun on debug logging that will tell you (or more likely me) what is happening - if the presses are being seen and remapped as expected. Repeat the action a few times and then send me the log (post a snippet here, PM it to m or email it to me).

You could also try setting the custom key to {CTRL}{LMB} to send both the CTRL and the left button (presuming the left button is the one you need to click), but if {CTRL} isn't working, maybe that wont either.

Thanks,
Phil
--[ Phil ]--
--[ Administrator & XMBC Author ]--
Logitech G9, Logitech MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, Intel i5-6600k, Asus 170-A, 16GB DDR4,
nVidia GeForce GTX 970, 2xEvo 850 (RAID 0), 2x2TB WD Black (RAID1)

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests