I just bought x-craft twilight 2000 it has 5 buttons and Idk how to use the macro setting in the software to change the forward key to SHIFT. Please help me I'm using xmbc v2.13.1 at the moment. Thanks
here's the software pic http://imgur.com/a/E6N7w
Update: I updated to 2.15 and this is what i did still not working http://imgur.com/a/QqytQ .. please help
How to set forward key to SHIFT
Moderator: Moderators
Forum rules
Please post to the correct forum, otherwise your post may not be seen.
Before posing, be sure to read and respect the forum rules
Please post to the correct forum, otherwise your post may not be seen.
Before posing, be sure to read and respect the forum rules
Re: How to set forward key to SHIFT
1. Use {SHIFT} not (SHIFT) - thats the curly brace not the bracket.
2. Select method 3 "During" not "Pressed" or "Released"
Try that, and next time, please post to the correct forum (XMBC) not general chat as I will be more likely to see it!
Thanks,
Phil
2. Select method 3 "During" not "Pressed" or "Released"
Try that, and next time, please post to the correct forum (XMBC) not general chat as I will be more likely to see it!

Thanks,
Phil
--[ Phil ]--
--[ Administrator & XMBC Author ]--
Logitech G9, Logitech MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, Intel i5-9600k, Asus Z390-ROG, 16GB DDR4,
nVidia GeForce GTX 970, Evo 970 500Gb NVME, 2x2TB WD Black (RAID1)
--[ Administrator & XMBC Author ]--
Logitech G9, Logitech MX518, Microsoft Intellimouse, Trust 16341 BT Mouse
Windows 10 x64, Intel i5-9600k, Asus Z390-ROG, 16GB DDR4,
nVidia GeForce GTX 970, Evo 970 500Gb NVME, 2x2TB WD Black (RAID1)