I have upgraded the board - please let me know if you have any problems

Search found 4886 matches

by phil
Sun Aug 20, 2017 12:49 am
Forum: XMouse Button Control
Topic: [feature request] inactive windows
Replies: 3
Views: 24

Re: [feature request] inactive windows

Try adding a {WAITMS:500} between activate and the keys.
by phil
Sat Aug 19, 2017 1:56 pm
Forum: XMouse Button Control
Topic: [Q] more Mouse buttons
Replies: 2
Views: 21

Re: [Q] more Mouse buttons

No, you can not "scan" the mouse in Windows. What would be the point of this? Are you aiming to use more than 5 buttons? It is explained in the FAQ why only 5 buttons are supported. If you are just waning this to configure the first 5 buttons, then why? what wrong with the current dropdowns? I have ...
by phil
Sat Aug 19, 2017 1:55 pm
Forum: XMouse Button Control
Topic: [feature request] inactive windows
Replies: 3
Views: 24

Re: [feature request] inactive windows

No need to change any code for this!
If you want to activate the window under the cursor when you press button 3, you can do this as follows:

Set button 3 to "Simulated keytrokes"
In the input field, type:
{ACTIVATE}{MMB}
Select "during..." as the method (method 3)
OK/Apply.
by phil
Sat Aug 19, 2017 11:21 am
Forum: XMouse Button Control
Topic: Blocking several clicks instead of only one?
Replies: 4
Views: 75

Re: Blocking several clicks instead of only one?

2 new micro switches (from ebay) later, a little effort with the soldering iron and m mouse button and my Logitech G9 buttons are restored to their former glory :) The MMB is a different switch though on this device and would be much less repairable :(
by phil
Fri Aug 18, 2017 8:47 pm
Forum: XMouse Button Control
Topic: Block Scroll wheel when MMB is pressed
Replies: 2
Views: 49

Re: Block Scroll wheel when MMB is pressed

You might be able to do this with button chording, it seems to work here (with one a very quick test)....
Set the MMB to button chording
In the button chording window, change scroll up/down to"Disable"
Tun off (uncheck) "Block/delay original button action...."

OK/Apply - try it and see if it works.
by phil
Thu Aug 17, 2017 8:49 pm
Forum: XMouse Button Control
Topic: Is the Logitech M585 Compatible w/ Xmouse??
Replies: 3
Views: 50

Re: Is the Logitech M585 Compatible w/ Xmouse??

Good luck and let me know how you get on, not least so we can add the mouse to the comparability list one way or another!
by phil
Thu Aug 17, 2017 4:43 pm
Forum: XMouse Button Control
Topic: Is the Logitech M585 Compatible w/ Xmouse??
Replies: 3
Views: 50

Re: Is the Logitech M585 Compatible w/ Xmouse??

Personally, I've not come across a Logitech mouse that is not compatible with XMBC. Sometimes the Logitech software (setpoint) can cause issues, or can configure the mouse buttons to behave differently so that XMBC does not see them) but generally this can be fixed by changing the configuration in t...
by phil
Tue Aug 15, 2017 7:43 pm
Forum: XMouse Button Control
Topic: 5 buttons and 4 directions roll mouses
Replies: 9
Views: 2111

Re: 5 buttons and 4 directions roll mouses

Hi Texta, you really should have created a new thread for your issue, but never mind :) I suspect you either have razor software installed which is remapping the tilt to scroll, or the razor driver does this. Try unloading any razor software (I'm not familiar with Razor devices so I dont know if the...
by phil
Tue Aug 15, 2017 7:47 am
Forum: XMouse Button Control
Topic: XMBC disabled on Windows boot but tray status shows enabled.
Replies: 1
Views: 43

Re: XMBC disabled on Windows boot but tray status shows enabled.

Sounds like the mouse hook is either not being set, or being timed out (i.e. removed by Windows). What is your hook timeout set to? You can find this on the Advanced settings tab "Windows low level hook timeout" setting. You could try increasing the value and see if it makes any difference next time...
by phil
Mon Aug 14, 2017 4:42 pm
Forum: XMouse Button Control
Topic: Blocking several clicks instead of only one?
Replies: 4
Views: 75

Re: Blocking several clicks instead of only one?

Its very unlikely to be a software problem with that mouse wheel/button - much more likely to be caused by hardware issues (like dirty/worn contacts). There isn't a lot of "software" on a normal mouse! Its quite common - back in the early 90s I remember (frequently) disassembling C64/Amiga joysticks...
by phil
Mon Aug 14, 2017 8:15 am
Forum: XMouse Button Control
Topic: Blocking several clicks instead of only one?
Replies: 4
Views: 75

Re: Blocking several clicks instead of only one?

My Logitech mouse is suffering a similar problem (so much so I have ordered some new microswitch and I'm going to fix it myself). I tried the debounce but its really not very useful, mainly because sometimes the button releases mid-drag. I cam to the conclusion yesterday that its not possible to pro...
by phil
Sat Aug 12, 2017 1:41 pm
Forum: XMouse Button Control
Topic: Long press of the middle mouse button, is there such a function?
Replies: 1
Views: 81

Re: Long press of the middle mouse button, is there such a function?

No there is no distinction between different length presses in XMBC yet.
It is something on the todo list but I dont know when it will get added.
by phil
Fri Aug 11, 2017 5:36 pm
Forum: XMouse Button Control
Topic: Trackpads?
Replies: 1
Views: 59

Re: Trackpads?

Yes it should do, trackpads send the same messages that mice do for scrolling as far as I am aware.
by phil
Thu Aug 10, 2017 8:53 pm
Forum: XMouse Button Control
Topic: {ALT}{F4} Closes All Windows!!
Replies: 4
Views: 103

Re: {ALT}{F4} Closes All Windows!!

Hi XLook, What version of windows are you using? I just tried to mimic your configuration (right button chord with tilt right set to sim keys {ALT}{F4}) on my Windows 10 desktop and it seems to be closing the windows explorer windows just find with that. If you are on a different version of Windows,...
by phil
Thu Aug 10, 2017 2:52 pm
Forum: XMouse Button Control
Topic: Help with Scroll for VB6 app in Azure VM
Replies: 4
Views: 83

Re: Help with Scroll for VB6 app in Azure VM

Oh sorry, I mistook "VB6 application" for "VB6" (i.e. the actual development environment). My profiles may work for the vb6 application but you will have to change the name of the application form "vb6.exe" to the executable name of your application as you suggested to the name of your application. ...